Sree Karuviyiyal
Sree Karuviyiyal
Noombal Road, Chennai, Tamil Nadu
GST No. 33APJPS9475H1Z9
TrustSEAL Verified
Call 0804861652578% Response Rate
SEND EMAIL

Tensile Testing Machine

Prominent & Leading Manufacturer from Chennai, we offer etm type c series tensile testing machine, etm type d series tensile testing machine, ssc series single column testing strength tester, etm type b series tensile testing machine and modernization of single column tensile testing machines.

ETM Type C Series Tensile Testing Machine

ETM Type C Series Tensile Testing Machine
  • ETM Type C Series Tensile Testing Machine
  • ETM Type C Series Tensile Testing Machine
  • ETM Type C Series Tensile Testing Machine
Get Best Quote
Approx. Price: Rs 7 Lakh / UnitGet Latest Price
Product Brochure

Product Details:

ApplicationTensile Testing
MaterialMS
PhaseThree Phase
Frequency50/60 Hz
BrandWance
Operating ModeAutomatic
Cross Head Speed500 mm/min
Load Capacity320 kN
Test Width420 mm
Country of OriginMade in India
Dimension775 x 660 x 2040 mm
Cross Head Travel1400 mm

The ETM type C Series addresses the needs of standardized and routine testing, providing the user high quality at the most affordable price. The dual column testing systems are suited for tension and/or compression applications with load range requirements from 500N to 50kN. They are typically used for quality control and production testing.

Typical specimens: Small components, reinforced plastics, metals, wire, composites, elastomers, wood products, textiles, biomaterials, paper products, adhesives, foam, consumer products.

Environmental simulation: Environmental chamber.

New Features:

  • Robust guidance columns increase lateral stiffness and ensure linear crosshead travel. This results in accurate crosshead alignment thus reducing variability in measurement data and producing better overall accuracy
  • Non-clutched drives, rated for full speed at maximum force
  • Compact design saves lab space
  • Wider test width


Performance :
  • Pre-loaded ball screws and heavy duty bearings assure long life with zero backlash as well as linear low force and through zero performance. The result is accurate and repeatable measurements that truly represent the specimen characteristics rather than load frame deficiencies.
  • Fully-protected lead screw covers provide longer life and greater operator protection.
  • Easy-to-clean aluminum column covers with chamfered corners to facilitate access to the test area. T-slots are built in for simple, convenient attachment and positioning of testing accessories.
  • High-speed, low vibration, world-class, maintenance-free, imported AC servo motor and servo controller.
  • Photoelectrical encoder built in servo motor system is for position measurement of crosshead.
  • Built-in bidirectional load cell is assembled in the middle crosshead to prevent any collisions and simple to perform compression or tension tests
  • Dual action over-travel limits on all frames provide the highest level of safety and meet all international standards.
  • Remote control keypad facilitates test operation
  • Full one-year warranty on parts and labor
  • Free software upgrading
    Request
    Callback
    Yes! I am Interested

    ETM Type D Series Tensile Testing Machine

    ETM Type D Series Tensile Testing Machine
    • ETM Type D Series Tensile Testing Machine
    • ETM Type D Series Tensile Testing Machine
    • ETM Type D Series Tensile Testing Machine
    • ETM Type D Series Tensile Testing Machine
    • ETM Type D Series Tensile Testing Machine
    Get Best Quote
    Approx. Price: Rs 12 Lakh / UnitGet Latest Price
    Product Brochure

    Product Details:

    Usage/ApplicationIndustrial
    ApplicationTensile Testing
    Capacity600 kN
    PhaseThree Phase
    Display TypeDigital
    BrandWance
    MaterialMild steel
    Operating ModeAutomatic
    Country of OriginMade in India

    The ETM type D Series addresses the needs of standardized and routine testing, providing the user high quality at the most affordable price. The dual column testing systems with rugged structure are suited for tension and/or compression applications with load range requirements from 50kN to 600kN. They are typically used for quality control and production testing.

    Typical specimens: Metals, building components, large fasteners, composites, wood products.

    Environmental simulation: Environmental chamber and high temperature furnace.

    New Features:

    • Robust guidance columns increase lateral stiffness and ensure linear crosshead travel. This results in accurate crosshead alignment thus reducing variability in measurement data and producing better overall accuracy
    • Non-clutched drives, rated for full speed at maximum force
    • Compact design saves lab space
    • Wider test width.


    Performance :
    • Pre-loaded ball screws and heavy duty bearings assure long life with zero backlash as well as linear low force and through zero performance. The result is accurate and repeatable measurements that truly represent the specimen characteristics rather than load frame deficiencies.
    • Fully-protected lead screw covers provide longer life and greater operator protection.
    • Easy-to-clean aluminum column covers with chamfered corners to facilitate access to the test area. T-slots are built in for simple, convenient attachment and positioning of testing accessories.
    • High-speed, low vibration, world-class, maintenance-free, imported AC servo motor and servo controller.
    • Photoelectrical encoder built in servo motor system is for position measurement of crosshead.
    • Built-in bidirectional load cell is assembled in the middle crosshead to prevent any collisions and simple to perform compression or tension tests
    • Dual action over-travel limits on all frames provide the highest level of safety and meet all international standards.
    • Remote control keypad facilitates test operation
    • Full one-year warranty on parts and labor
    • Free software upgrading
      Request
      Callback
      Yes! I am Interested

      SSC Series Single Column Testing Strength Tester

      SSC Series Single Column Testing Strength Tester
      • SSC Series Single Column Testing Strength Tester
      • SSC Series Single Column Testing Strength Tester
      Get Best Quote
      Approx. Price: Rs 4.5 Lakh / UnitGet Latest Price
      Product Brochure

      Product Details:

      ApplicationTensile Testing
      Capacity200 kN
      Usage/ApplicationIndustrial
      MaterialMild Steel
      ColorBlack
      Packaging TypeWooden Box
      Display TypeDigital
      BrandSreeKa
      Operating ModeAutomatic
      Voltage220 V
      Number Of PhasesThree Phase
      Cross Head Speed0 - 500mm/min
      Country of OriginMade in India
      Displacement500-1000 mm

      The SSC Series Single Column Testing Strength Tester are suitable for the flexible specimens which will have high elongation at low breaking force which have less than 5kN. 

      It can be used in both tension and compression strength tests. Compact Tabletop model requires less space. It is highly precise and robust for the usage in research and qaulity testing laboratory and production unit.

      Typical specimens: plastics, fine wire, fibers and threads, biomaterials, thin films, adhesives, foam, packaging, paper products, consumer products

      Features:

      • Robust linear motion guide increases lateral stiffness and ensure linear crosshead travel. This results in accurate crosshead alignment thus reducing variability in measurement data and producing better overall accuracy.
      • servo motor with precise planetary gear speed reducer provides higher driving efficiency, low noise and free of maintenance. 
      • Compact design saves lab space.

      Performance :
      • Pre-loaded ball screws and heavy duty bearings assure long life with zero backlash as well as linear low force and through zero performance. The result is accurate and repeatable measurements that truly represent the specimen characteristics rather than load frame deficiencies.
      • Fully-protected lead screw covers provide longer life and greater operator protection.
      • Easy-to-clean aluminum column covers with chamfered corners to facilitate access to the test area. T-slots are built in for simple, convenient attachment and positioning of testing accessories.
      • High-speed, low vibration, world-class, maintenance-free, AC servo motor and servo controller.
      • Photoelectrical encoder built in servo motor system is for position measurement of crosshead.
      • Built-in bidirectional load cell is assembled in the middle crosshead to prevent any collisions and simple to perform compression or tension tests
      • Dual action over-travel limits on all frames provide the highest level of safety and meet all international standards.
      • Remote control keypad facilitates test operation
      • Full one-year warranty on parts and labor
      • Free software upgrade
       
      Request
      Callback
      Yes! I am Interested

      ETM Type B Series Tensile Testing Machine

      ETM Type B Series Tensile Testing Machine
      • ETM Type B Series Tensile Testing Machine
      • ETM Type B Series Tensile Testing Machine
      Get Best Quote
      Approx. Price: Rs 7 Lakh / UnitGet Latest Price
      Product Brochure

      Product Details:

      Usage/ApplicationIndustrial
      Capacity350 kN
      MaterialMild Steel
      Display TypeDigital
      BrandWance
      Operating ModeAutomatic
      Test Width420 mm
      Dimension728 x 470 x 1250 mm
      Cross Head Travel500 mm/min

      The ETM type B Series addresses the needs of standardized and routine testing, providing the user high quality at the most affordable price. The dual column testing systems are suited for tension and/or compression applications with load range requirementsfrom 10N to 10kN. They are typically used for quality control and production testing.

      Typical specimens:Small components, reinforced plastics, metals, wire, composites, elastomers, wood products, textiles, biomaterials, paper products, adhesives, foam,consumer products.

      New Features

      • Non-clutched drives, rated for full speed at maximum force
      • Compact design saves lab space
      • Wider test width


      Performance :
      • Pre-loaded ball screws and heavy duty bearings assure long life with zero backlash as well as linear low force and through zero performance. The result is accurate and repeatable measurements that truly represent the specimen characteristics rather than load frame deficiencies.
      • Fully-protected lead screw covers provide longer life and greater operator protection.
      • Easy-to-clean aluminum column covers with chamfered corners to facilitate access to the test area. T-slots are built in for simple, convenient attachment and positioning of testing accessories.
      • High-speed, low vibration, world-class, maintenance-free, imported AC servo motor and servo controller.
      • Photoelectrical encoder built in servo motor system is for position measurement of crosshead.
      • Built-in bidirectional load cell is assembled in the middle crosshead to prevent any collisions and simple to perform compression or tension tests
      • Dual action over-travel limits on all frames provide the highest level of safety and meet all international standards.
      • Remote control keypad facilitates test operation
      • Full one-year warranty on parts and labor
      • Free software upgrading
        Request
        Callback
        Yes! I am Interested

        Modernization Of Single Column Tensile Testing Machines

        Modernization Of Single Column Tensile Testing Machines
        • Modernization Of Single Column Tensile Testing Machines
        Get Best Quote
        Approx. Price: Rs 1 Lakh / UnitGet Latest Price

        Product Details:

        Minimum Order Quantity1 Unit
        MaterialStainless Steel
        Display TypeDigital
        Model Name/NumberMEMSD
        Capacity1000 kN
        Usage/ApplicationIndustrial
        Automation GradeAutomatic
        PhaseSingle phase
        FeaturesHigh speed PID controller, Compact, compatible with any brand
        Driving MethodServo Motor, Screw Driven, DC Motor
        Accuracy0.1%
        Voltage230 VAC

        Modernization of single column tensile testing machines. We have got powerful tensil testing machine with advance testing software. It can be interfaced with any brand machines and you can bring back your old machines with all the latest advanced machine's features.

        • Controller is compatible with any international brand testing machine
        • Suitable for electro mechanical/ screw driven Single column and Dual columns testing machines
        • High speed controller
        • Highly accurate measurement
        • Stable performance
        • Compliance with all the safety
        Request
        Callback


        Additional Information:

        • Delivery Time: 2-10 weeks
        • Packaging Details: Air and sea safe packaging
        Yes! I am Interested
        X

        Explore More Product

        View All Product


        Reviews & Rating

        4.7/5

        ★★★★★★★★★★

        Reviewed by 40 Users

        • 5★70%
        • 4★20%
        • 3★2%
        • 2★0%
        • 1★8%
        • User Satisfaction
        • Response94%
        • Quality     87%
        • Delivery   66%

        Most Relevant Reviews

        A
        ★★★★★★★★★★
        14-June-22
        Ahmad Mohammadi
        Iran
        Product Name : LVDT Transducers
        Response
        Quality
        Delivery

        Response from Seller (03-September-22)

        Thank you

        D
        ★★★★★★★★★★
        12-October-21
        De Moura
        Brazil
        It´s so good
        Response
        Quality
        Delivery

        Response from Seller (16-October-21)

        Thank you

        S
        ★★★★★★★★★★
        20-March-20
        Senthilkumaran M S
        Chennai, Tamil Nadu
        Very Good response. Good knowledge on the load cell.
        Response

        Response from Seller

        Thank you sir.

        View More Reviews




        Reach Us
        Sree Karuviyiyal (Proprietor)
        Sree Karuviyiyal
        59, 60, Moovender Nagar
        Noombal Road, Chennai - 600077, Tamil Nadu, India


        Call Us


        Send E-mail